Specifications:

Model: JF-130

Power: 4 kW (with speed reducer)

Voltage: 380V

Weight: 180 kg

Number of Blades: 2

Holes: 1

Stripping Range: 30-160mm

Processing Capacity: 30m/minute

 

Usage Precautions:

-When using a 220V plug, ensure that the extension cord is not too long or too thin. A 3-kilowatt motor is equivalent to a 3P air conditioner; if the cord is too long or too thin, it can cause the capacitor to burn out or the motor to overheat.

-High-power motors have strict power requirements. Insufficient grid power, loose external connections, or unstable voltage can prevent the motor from starting properly, causing the centrifugal switch to not fully disengage. This can lead to overcharging and damage to the starting capacitor. Therefore, users should connect the power supply directly to a circuit breaker or power meter instead of using a power strip, as the internal wiring of power strips is usually thin and prone to issues.

-Before using the motor, ensure a stable power supply (to avoid capacitor damage, motor overheating, or tripping). Ideally, run a dedicated line from the power meter, install a circuit breaker, and then connect the motor. The motor's wiring should be done properly, similar to an air conditioner, and should not be treated like a light bulb or power tool.